ThermIQ-MQTT/Room ->ThermIQ-ROOM2 upgrade kit

520 SEK

Upgrade your ThermIQ-MQTT/Room interface to ThermIQ-ROOM2

SKU: ROOM2-KIT Category:

Description

Upgrade your ThermIQ-MQTT to ThermIQ-ROOM2. The upgrade kit consists of the combined thermostate and EVU interface and the firmware update needed to control it.

  • ThermIQ-MQTT: If your current version of ThermIQ-MQTT is fw 1.xx you need to send your ThermIQ-MQTT to us for upgrade.
  • ThermIQ-MQTT: If you have fw 2.xx you can also choose to install the interface yourself. The installation requires soldering skills to attach four new wires to the existing board, similar to the current interface.
  • ThermIQ-Room: If you have ThermIQ-Room version 1 you can order the ROOM2 upgrade kit and replace the Room module without any specific tools. A software update is required once the new module is in place.

Please check your heatpumps manual for installation. The most common way to connect ThermIQ-ROOM2 to the heatpump is like this:

 

 

 

 

 

 

Please state which fw version you have and if you want to do the upgrade yourself in the comments field in the ordering process

It is not possible to use the Thermia indoor thermostate together with ThermIQ-Room and Thermia Online

Additional information

Weight 0.1 kg
Dimensions 10 × 10 × 1 cm