The firmware on the ThermIQ, ThermIQ-LINK, ThermIQ-WLAN and ElectrIQ-interfaces can be easily updated by connecting it to a PC.
- Push the reset button at the same time as you connect the ThermIQ-interface to your PC.
- After a while you will see a sequence of 2 short blinks on the Status LED indicating that the interface now is ready to accept a new firmware.
- The PC should recognize the interface and add is as a standard USB drive.
- Explore the drive and you should see three files with date and version numbers:
BOOT och CONFIG are read-only. APP is the firmware that can be uppgraded.
Simply drag a new APP_xx.yy file and drop it on the old in order to replace it. You should see the new version when done. If by some reason you would see APP_BAD then repeat the procedure until it works.
When done, delete the BOOT_xx.yy file and ThermIQ will restart with the new firmware!
You will always find the latest firmware in the Thermiq_fw directory of the ThermIQ software distribution and it can be downloaded from the links below: